.jpg)
Features
- When the vehicle is passing through the channel, its cargo loaded is scanned without stopping.
- Driver cabin is avoided to be scanned.
- After scanning, the vehicle’s information, vehicle side video, and its x-ray fluoroscopic information image are generated at the same time, the loading rate of the vehicle is automatically calculated, and the cargo conditions in the car compartment can be analyzed and differentiated in detail.
- The x-ray images clearly show the mixed condition in the compartment, and synchronously prompt the inspector to verify.
- Automatically identify the information of the scanned vehicle, including the license plate number, color, etc
- The inspection data and judgment results are automatically stored according to the inspector’s login information for later use, and vehicle side video and x-ray images are stored also.
- Provide standard Ethernet interface for remote monitoring, debugging, and data transmission.
1. When the green indicator light is on, the vehicle is allowed to enter the detection area.
2. When the Front ground coil senses the vehicle, the road barrier automatically lifts up and the vehicle can enter the detection area.
3. When the vehicle passes the background coil, the road barrier automatically falls, preventing other vehicles from entering the detection area before the vehicle completes the test.
4. When the vehicle blocks the start sensor, the license plate recognition camera takes a picture of the front of the vehicle and automatically recognizes the license plate number and the speed of the vehicle. At the same time, the red indicator light of the x-ray machine lights up to remind the staff that the high voltage has been turned on.
5. When the vehicle blocks the Mid sensor, the side camera starts taking the side video, the x-ray is power on (the red indicator light is on, but no x-ray is generated).
6. When the vehicle blocks the End sensor, the front of the vehicle has passed the x-ray source by 2~3 meters to ensure that the cab is not exposed to x-rays, the yellow indicator light is on (x-ray is on) and the x-ray scans the vehicle compartment as it’s moving.
7. When the rear of the car leaves the Mid sensor, the x-ray ends the scanning. The yellow warning light turns off and the side camera stops working.
8. When the rear of the car leaves the End sensor, the x-ray power supply (high voltage) and the red warning light are turned off.
9. After the vehicle leaves the toll booth, the toll collector presses the “Confirm” button and the system is ready for the next vehicle.
- Model: VIX216
- Effective length: 2400 mm
- Pixel Value: <2.5 mm
- Scanning Vehicle time: <5s (15 km/h driving speed)
- Maximum Vehicle Size: 3.5 (W) * 4.5 (H), unlimited length (depending on the length of the lane safety island
- Detection Speed: 3 ~ 15km/h
- Communication: RS232, remote software control trigger
- Focus size: Nominal value is not more than 0.8mm (according to IEC60336-2005 standard)
- X-ray fan radiation angle: 83° × 5.0°
- Convergence window radiation angle: No more than 65° × 1.78°
- X-ray generator: 160KV, sealed oil cooling
- Tube current: 0.3~1.2mA
- Tube life: >6000 hours
- Ray direction: Sideward
- Detector type: Line array detector
- Height: > 2.4 meters
- Resolution: <2.5mm
- Voltage: 12V
- Fisheye lens: Focal length and aperture adjustable
- Resolution: 2048 x 1
- Maximum line frequency: 3.4kHz (To avoid low-speed trailing, line frequency will be reduced)
- Pixel size: 7.04 μm
- Output format: GigeE
- Size: 62 X48 X 48mm
- The imaging system has the functions of prompting alarm, history data search, printing, etc.
- The main interface displays the current status of the system (automatic, manual), vehicle position, vehicle speed and other information.
- The search interface contains information such as License Plate number, time, result, judgment result, vehicle model, entrance, exit, charging result, tax exemption amount, replenishment amount, and inspector.
- You can choose a fixed time or a fixed inspector to generate the form.
- The image storage format adopts HIS format and can be converted to common and standard image storage formats.
- The stored information includes real-time image of the vehicle from side, x-ray image, the image of the front of the car, the license plate number, the judgment result, the amount of the charge, etc.
- Power supply voltage: 230VAC +/- 10%, 50/60Hz
- Power supply current: <2A
- Working temperature: -40 ° C ~ 70 ° C
- Working humidity: < 95% (no condensation)